Cas No. 69430-35-9 Tackifier Resin Dicyclopentadiene Resin For Hot
Product Name : DCPD (Dicyclopentadiene) Resin
Type : HY - DCPD120
CAS No. : 69430-35-9
It’s a granular solid with the white color, it has the properties
of good glossiness, mutual solubility, water resistance, insulation
and very good chemical stability over acid and alkali, and good
adhesive strength and holt heat conduction, etc. It's very widely
in many industries.
It is white thermoplastic resin obtained from polymerization and
hydrogenation of cyclic ingredients.
|Acid Value(KOH mg/g)||≤1|
|Ash Content %|
|Melt Viscosity(180℃ cps)||≥370|
1. It is used as tackifier for hot melt adhesive(HMA)
2. It is used as hot melt pressure sensitive adhesive(HMPSA)
3. It is used as solvent based pressure sensitive adhesive(SBPSA)
4. It can be used in sanitary goods, such as diaper and sanitary
5. It has good compatibility with epoxy resin in ester solvent and
has good curing rate to epoxy resin. It can be used as modifier.
6. It can reduce the cost of coatings, reduce the shrinkage force
of epoxy resin, improve the adhesion of coatings, improve the
permeability of coatings to cement and steel, enhance the
wettability of pigments.
7. Add to the ink can play exhibition color, quick-drying,
brightening effect, improve printing performance and so on.
Packing and Storage
1. Package: 25kg Paper bag.
2. Storage: Kept in a low temperature, dry and ventilated place,
avoid direct sunlight.
3. Shelf life: One year in ventilating, cool and dry area.